In the process of making knives, there is time that you really need Drill Drum Sander. It is especially important to reach small corner like the guard and some other section of the handle.
Indeed, one can use sand paper strips and rasps. but as I discovered, to get aesthetically pleasing result and to make the process a lot faster, you need Drill Drum Sander.
You can buy Drill Drum Sander and they are easy to find. But it is expensive.
So, true to myself, I thought I will build one. And following are my way to do it.
I will show two methods to do it. For one, you need Band Saw. For the second method, you will need Hole Saw Cutter.
You will also need: Good quality Aluminium Oxide Abrasive Paper in various grit size, few pieces of hard wood to accommodate your intention drum sizes, contact glue, Arbore Assembly kit and a divider (compass).
If you use the band saw you will have to finishing the shape of the drum by sanding it.
Apply glue to the drum and the sand paper (best to follow instruction given by the glue manufacturer) and attached one to the other.
All you have to do is to attached the drum to the arbore shank and here you have it.
Share this post